Very,very interesting post by Iancanada@diyaudio-forum/ESS-controller…
came by chance about this post in the diyaudio-forum->http://www.diyaudio.com/forums/pc-based/302687-es9018k2m-es9028q2m-9038q2m-dsd-i2s-dac-hats-raspberry-pi-post5386371.html
its from email@example.com, Github->https://github.com/iancanada/DocumentDownload..
„Dimdim“ from the famous Hifiduino-project is also there and they discuss a project in which the „..Sample rate, clock frequencies, X*Fs, date length, PCM/DSD/DoP format..“ could be determined by a „signal format analyzer“ (developed by Iancanada) running on the ARM-processor/Raspberry Pi to „run the ES9038Q2M in high-performance-mode“ 😉 ..
a lot of really interesting infos !! (i dont write here some more cause i don´t know if i have the „permission“ for it..)
also with the pictures..i took only here one or two; hope its okay for Ian..(if not please mail) 😉 (i personally think posting here a lot of pictures from his projects could help him to sell more from it/have more budget to develop !)
a MUST read !! 😉
(interesting is also that he uses some STM32 for his „ESS-controller; we/i´ve made some tutorials/first steps with it here too)
(another interesting topic there is by „Mikett„; he says „..in the end I stuck with the 49720. It sounded slightly better than the 5532. The 5532 seemed to provide better drive but the higher frequencies on the 49720 was better I thought.“ and thats absolutely the same as i feel/think about the „drive“ on a NE5532 and second about the LME49720 which ESS recommends (see the table in an earlier post)