ES9038Q2M+other: The right voltage/cleaner Power/Power supply->USB-bridges-/Sabre-Boards..

and so, 😉
we are now here again with a main “Hi-Fi”-theme/problem:
“Clean-/clear-/power” and Power-Supplies” 😉 ..
It´s all about the right-/clean power, voltage-regulator-/stabilizer..
i´m very often in this very good forum concerning all these electrical things/also concerning the ES9038Q2M->
http://www.diyaudio.com/forums/digital-line-level/314935-es9038q2m-board-38.html
so, and i came again to this subject (matter), cause i had/these “stuttering”-problems again with the Skysong-/Singxer-USB-bridge+the ES9038Q2M..
first i thought it´s mainly a driver problem but meanwhile i guess it could also be a power-supply problem->5V on the USB-bridge via USB !! (500mA); could really be a problem(-“stable-wise”)..
I came by it because i (try to) made a DIY-power-supply with a 32V-HP-power supply for some printer + a cheap “Step-down-power regulator/supply” from Aliexpress->
http://essabre-90xx-rpi.sfb2.com/2018/01/diy-make-your-own-15v-dc-power-supply-for-es9038q2m-or-other-the-cheap-way/
it had 625mA and i thought this should be enough cause i´ve read elsewhere that the ES9038Q2M only needs roundabout 200mA..
I connected my ES9028Q2M with this regulator and (adjusted it down to 15V) to my raspberry and got a horrible, horrible stuttering !!
thought first it was a software-problem but wasnt..asked some user in the forum and they told me that some power-supplies may become “unstable” with/on “low-load”..
anyway this brings my again to the above “topic” and now i think i better use a 5V-stand alone-power supply with minimum 1A for my USB-bridge (the Skysong-/Singxer have the possibility via a barrel-jack)..
by that i´ve ordered some other 15V-power supply with “stable” 2A for the ES9038Q2M..
where we so come back to the main “theme”: Dual 15V for the ES9038Q2M and power-supplies in general..see above 😉


(the pictures are from “Markw4” from the above mentioned forum; hope i can use them here, there are just to “illustrate”; if not please some e-mail)

Schreibe einen Kommentar

Deine E-Mail-Adresse wird nicht veröffentlicht. Erforderliche Felder sind mit * markiert.