Got today the AK4113 digital receiver to I2S-output/ still at 96khz/24bit..

so, 😉

got today this little “gem”, the mentioned AK4113 Digital Receiver Board + LCD1602 Screen SPDIF Optical/Coaxial/I2S To I2S Converter”(LINK)

thought first i have to solder the pinheader for the LCD1602 by myself; but it was already soldered->

“powered” it by a simple usb to 5V “converter” but all i got at the end was 96khz/24bit via the hdmi-audio-extractor and also via the coax/toslink-output of the Sony BDP-S7200 and the Philips BDP9700/12->

tried all different settings in the system-menus from the both player (auto,bitstream,pcm etc.,etc.)->no success..also via the hdmi-extractor the max was 96/24..

but don´t know if the AK4113 detects (and displays) it accordingly; but the 3 manual settings on the extractor were “pass”,”2ch stereo” and “5.1”..with the “pass” and “2ch stereo” i got only 48/24 max..has to “evaluate” it more..

UPDATE 1: seems like these special 4k-hdmi-switch/audio-extractor only supports audio up to 96/24..so, be careful in choosing the right one !!

another thing was that i wanted originally connect the AK4113 via I2S (to bypass the spdif-conversion) to an ES9038Q2M, but absolutely no “lock”-light..thought about it a lot and i guess (at the moment) the I2S-line (-cables) are too long (ca.30cm)..(read it sometimes ago->”the i2s-line(-cables) has to be short as possible (5-10cm)..”

UPDATE 2: curiously, i´ve got the “lock”-light (and its playing) with the “blue” ES9038Q2M; so, again, there is often a compability-problem with different devices..

greets for now + much more to come.. 😉

Schreibe einen Kommentar

Deine E-Mail-Adresse wird nicht verĂśffentlicht. Erforderliche Felder sind mit * markiert.