Bargain of the day->Topping D50S ! (Dual ES9038Q2M +XU208 +BT + Remote) / AK4137 SRC

so folks 😉 ,
sorry thats its a little bit silent here on essabre-90xx-rpi lately, but there were a lot of other things to do 😉 , but i´ve just seen by chance this bargain on massdrop->
Topping D50S, XU208+Dual ES9038Q2M + BT + Remote for only 200$ !! ->
LINK
vs. „old“ D50->
the D50S (in opposite to the D50) a built in BT-modul (was at first sight, in aspect to the „ultimate hi-fi“, is not soo good) but also comes with a remote-control + had made some improvement „soundwise“, means they solved the „IMD ESS hum“, where at mid-levels, intermodulation distortion suddenly rises“..

very good test/article about the D50S is here->https://www.audiosciencereview.com/forum/index.php?threads/review-and-measurements-of-new-topping-d50s-dac.7914/

also they made some minor sound-improvements (all in the article)..

https://drop.com/buy/topping-d50s-dac?utm_source=linkshare&referer=Y6KDJ4

as said for only 200$ (190$ if u first join massdrop via these essabre-links here(„Xavier“)) its maybe worth a try..
so and as lately said that the onboard spdif-conversion (on the ES9038Q2M) is not so optimal we have to look for an alternative and also somebody said at my praised diyaudio.com-forum->Link that „..upsampling to DSD is always better concerning thd/snr and so on, because of eliminating/move the noise in an unaudible range..“ and to reduce jitter i´m thinking about to buy some SRC4192..(SNR= 768khz, DR: 186dB !! ● THD+N: -150dB ) -> http://essabre-90xx-rpi.sfb2.com/?p=1833

there are some around for only 27$ on ebay->Link and the „high-end“-version with toslink and coaxial option + 1.3″ display (+ AK4118 spdif-receiver chip) for 80$->Link..

my goal at present is to raise the sq directly from a transporter via spdif and then maybe upsampled, but still more jitter-less to feed it in the ES9038Q2M..

will maybe then report more about it..

by that the raspberry 4B+ is out and so on..maybe then more,

greets for now !! 😉

SFB2

Schreibe einen Kommentar

Deine E-Mail-Adresse wird nicht veröffentlicht. Erforderliche Felder sind mit * markiert.