essabre-90xx-rpi.sfb2.com will move (to a new server) + Nuforce Udac5 + SMSL SMSL X-USB II

so, 😉
unfortunately nothing new here in „modding“ the ES9038Q2M; still on the search for the right transformer->there are some on Ebay+Aliexpress+Audiophonics but didnt make a choice till now:(15V-0V-15V)

Moode is now at V5.0-> (http://moodeaudio.org/)

and as also said in their description->
„Most USB audio devices work with moOde via the Linux kernel USB audio driver but some devices with high speed UAC2 chipsets may require the USB (UAC2) work around in System Config“
„the way-to-go“ (and to get „real“ DoP/DSD) is nowadays (IMO) via some XMOS-USB-device->I2S->ES90XX..
we had it here in discussion, and with the new USB2.0(3.0) linux-kernel-driver u can achieve real DoP/DSD with the ES9038Q2M; and only then..
by that, as also said, with USB3.0, + a wonderful xmos-bridge (see some posts before) + ES9038Q2M u already have a superb „tune“, really near to the „unbeaten“ raspberry pi-I2S-ES9038Q2M-connection..(and its absolutely more comfortable)..
by that in speaking of a wonderful XMOS-usb-bridge we have now here a „SMSL X-USB II Digital Interface USB XMOS U208 to I2S LVDS HDMI “ (70€) with I2S->over HDMI which also said in some posts before, is the most „handiest „-possibilty to connect to an ES9038Q2M (with some I2S->LVDS converter directly connected to the dac-board)->
https://www.audiophonics.fr/en/digital-interfaces/smsl-x-usb-ii-digital-interface-usb-xmos-u208-to-i2s-lvds-hdmi-optical-coaxial-32bit-768khz-dsd512-silver-p-13739.html



(post -> http://essabre-90xx-rpi.sfb2.com/2018/12/hdmi-i2s-lvds-to-i2s-modules/)
SPECIFICATIONS
Product type USB Interface
USB Interface chip XMOS U208
Input 1x Micro USB
Outputs 1x I2S LVDS via HDMI
1x Coaxial S/PDIF
1x Optical Toslink
Supported sampling rate I2S : PCM up to 32bit 768kHz / DSD up to DSD512
Optique, Coaxial : PCM up to 24bit 192kHz / DSD64
THD+N < 0.00002% Dynamic range > 140dB
SNR > 140dB
OS Compatibilité Windows, OSX, iOS, Android

by that „essabre-90xx-rpi.sfb2.com“ will move next month or so to a new server due to cost/performance reasons; i hope i can move this site/blog/forum without great problems to the new location; excuse me then for any conveniance->a mirror (from this site) is just set-up at -> http://essabre.ddnss.org <- is just right now only for testing; the main url (essabre-90xx-rpi.sfb2.com will (hopefully, 99%) remain); u can test the above-url performance-wise.. (more > Nuforce Udac5 in Part 2)..
greets for now !!

Schreibe einen Kommentar

Deine E-Mail-Adresse wird nicht veröffentlicht. Erforderliche Felder sind mit * markiert.