ESP32S: combined ES9038Q2M web-/BT control / filter+source-settings + HW-volume

so, ­čśë
in reading my (this) own blog, its really lately almost the same/repeating ­čśë ..
but anyway, its a „blog“ and so today an update of this ES9038Q2M web-/BT-control..
i included now the complete „Bluetooth-control/block“ in the ESP32s-sketch..
by that i┬┤ve included a NTP-time server function in the sketch/on the GUI..

i┬┤ll post the sketch also in the forum->LINK, and i┬┤ve learned a lot about the ESP32S, the usable (and which) GPIOs, setup different hardware.serials and so on..
its still a little bit difficult to get some really useful information/sketches for the ESP32S, so i post the sketch there too and maybe someone will find something useful information in it..(+general thoughts/hints)
the web-control GUI itself is now with the HW (Digi-Poti MCP4131)-control in max/min, 10,4 and 1 steps..(max/min,+10/-10,+4/-4,+1/-1)..(the „slider“(HW-volume)-function is in progress ­čśë )
also the filter control is still working..

(the layout/fonts on the Mega2560 based 3.5″ display is btw. absolutely horrible and really shitty, cause i must use the „normal“ Adadruit.gfx-library with a super shitty command-set..before (with the other 2.8″ display i could use the „UTFT„-library->much much better/absolutely more comfortable+better looking)
greets for now and more to come ­čśë

Schreibe einen Kommentar

Deine E-Mail-Adresse wird nicht ver├Âffentlicht. Erforderliche Felder sind mit * markiert.