ES9038Q2M: „Project 2“->building a BT-controlled HW-Volume-control (digital pot 10kOhm) MCP4131

so, 😉
because its a little bit silent around here lately, we still don´t know if the „Blue“ ES9038Q2M has a „shitty“ pcb and the „green“-ones sounds better, i have still buffer/“lock“-problems in windows using the V4.36 Singxer-driver on the Skysong-XMOS-USB in sample rates above 16/44 i wanted to use the onboard-HW-volume control, to which u can connect a normal 10kOhm-potentiometer (see pictures) easy..

 


i tested it here, and it works far not so good as expected and i guess u have a very small range of about 20% or so (in my feel) too..
i thought i could easy use the Arduino with analogwrite () and connect one pin to the middle of the onboard-3 pin but what i´ve read so far is that the Arduino can only send out PWM-signals so u need an external digital potentiometer (thats what i´ve read so far, don´t know if its true) and control it via the (in this case) SPI-bus/protocol..
for this u can buy a cheap MCP, in this case a MCP4131 of around 0,89€ and a Dip-8 socket (0,51€) etc.,etc..(more to come..)


(very good tutorial for this right now:
http://www.learningaboutelectronics.com/Articles/MCP4131-digital-potentiometer-circuit.php)

i will post here any „improvements“ (and (maybe) a full tut) asap..!! 😉

Schreibe einen Kommentar

Deine E-Mail-Adresse wird nicht veröffentlicht. Erforderliche Felder sind mit * markiert.