Volumio (now at V2.452) did it->DSD/Lock light on ES9038Q2M / Alsamixer Archphile XMOS USB Audio etc..

so, 😉
after i tested „Archphile“ with the Skysong-Xmos-USB-interface and still don´t know how to limit the DSD-rate to the DAC/-combo (it uses 705600 but the ES9038Q2M doesnt support it, i got only a heavy white noise), tried everything in the /etc/mpd.conf; i used again „Volumio“ as it said in one of their forums something about their DSD-native/DoP-compatibilty..
so let it run and hooray, the DSD-Led on the ES9038Q2M + the DSD-indication on the skysong-bridge were lit !!

(hadn´t got the DSD-indication before afaik).

wonderful, true DSD/DoP-sound !! 😉

had used foobar2000 with the Asio-driver/DSD-processor, the singxer audio-panel said:“Asio active(PCM-mode)-352800khz sample-rate“, see 2 posts before, but meanwhile i think it was converted !! to PCM- (with soxr by example) >because i hadnt got the DSD-led on and it wasnt not such a great improvement to „normal“ PCM..
now with volumio it sounds absolutely fantastic, absolutely real DSD-„sound“ !! („real“ DoP)

by that i´ve think meanwhile „Archphile“ is for the really high-end USB-DACS->384khz,768KHz (and above); think its about the „Arch-linux ARM“-kernel/core..
also u got a wonderful „Alsamixer-volume and master-clock“-mixer for the XMOS-USB-audio interface (with the command „alsamixer“)->

also interesting in Volumio is that if use the „resample-option“ in the settings it affects also the „DoP-chain“->set at 384khz resample/sox/very high, got my red light (PCM) on the bridge on and no DSD-light on the ES9038Q2M..
interesting II. is that u can resample up to 768khz (in Volumio) and u can hear something (but heavy white-noised) on the ES9038Q2M although somebody posted it can only play/(is capable of) up to 384khz in „asynchron-mode“; but i heard here something..->

greets for and more to come !! 😉

„Archphile 0.99.73 Alpha“ + XMOS USB-Bridge (Skysong)->768 khz !!..

so, 😉
in trying to play finally some real/Native DSD on some (our „lovely“ 😉 ) chinese ES-Sabre-boards i came by chance about the „Archphile“-distro->https://archphile.org/ (knew about it , but hadnt got the time to test it till now)

it uses mainly the mpd-subsystem and i´ve read some days ago that it also could be a driver problem/xmos-usb-driver thing on linux to get DSD-native to work..!!
so and today after imaging the archphile-archive, and first i must say its really hard/difficult to „understand this archphile-distro“, because u got only a MPD-user interface with almost no settings (for the DAC for example and so on), u have absolutely to work over SSH in first place..
so but the really interesting thing is this->
first picture is the output of the „alsacap“-command (its Arch-linux)->
absolutely super fantastic !!! it says that the XMOS-USB-device (Skysong) can handle up to 768khz (via linux usb-driver)!!!

(a problem could (may) be that it didn´t show the „DSD_U32_BE“ sample-format which is normally a clear point/-„ means that this DAC supports Native DSD in Linux.)
but anyway absolutely fabulous !!
and much more fantastic is that it sends 705600 !! to the xmos-usb !!!->(with the „perfcheck“-command)

by that, „Archphile“ has a very good/clean sound; sounds better than the picoreplayer for example (IMO), really,really clear !!

but got a really „destroyed/white noise“-tune with these 705600 on the ES9018K2M(and didn´t find a way here right now to lower it down to 352000 for example); have it really hard  to work it out here at present; (the ES9018K2M has lower capabilities DSD-wise than the ES9028Q2M or the ES9038Q2M for example).

flacs (all up to 24/192) are playing very,very well..but anyway as said, really,really great news !!

more to come !! -> greets for now !! 😉

Little update: SINGXER SU-1 DRIVER UPDATE V4.45 (06.JULI 2018)

little update:
as said in this post->http://essabre-90xx-rpi.sfb2.com/2018/08/singxer-su-1-driver-update-v4-45-06-juli-2018-v7-24-i2s-hdmi-pinout-matrix-x-sabre-pro-9038pro/ i had now the time to test the V4.45 (we had V4.36 (Singxer_USBAudio_v4.36.0_2017-11-14_DSD512.rar)) on Win10 with a Skysong (Singxer) USB-XMOS-XU208 + ES9038Q2M and it sounds great (especially also on foobar in DoP)..->Link
i surmise its slighty slightly a little bit better (almost „hypothetical 😉 )(but in foobar in DoP (DSD128) its great as said)->

more about it (+file+link) in the forum->http://essabre-90xx-rpi.sfb2.com/forum/showthread.php?tid=75

greets for now 😉

Some new ES9038Q2M-things../ Raspberry Pi 3B+ first impressions..

so, 😉
some user at my praised Diyaudio.com-forum->Link said something about a new MShow-Audio „SU5-ES9038Q2M-DAC-HIFI-XU208-DSD-TPA6120-Headphone-audio-Amp-Bluetooth-5-0″->Link 160$, and interesting is that they used some AK4113 for SPDIF-conversion; posted here earlier something about it->Link; for me another „indicator“ that the „original“-spdif conversion by the ES9038Q2M on this board is not soo good as expected, as stated also earlier; better choice would be using some SRC4192 or AK4137->Link

by that, as thinking to buy some Green ES9038Q2M V1.07, including the display, i found some pictures with this display delivered/attached in „action“ and that looks not soo nice (frankly said) 😉 , so i think its better to continue to try to build an „own“ version (display-wise) 😉

by that i´ve bought some new Raspberry pi 3B+ (cause i´ve „fucked“ up my Raspberry Zero W with some ugly soldering) and first thing i can say about the new „wifi“ (N/AC) that i had yesterday (measured with iperf3) 84Mb/s (10MB/s) via N (Asus-RT56U); not soo good (expected 300mb/s)..
greets for now 😉

Hooray !! Essabre-90xx-rpi teamed up with „Allo“..;-)

so, 😉
nothing spectacular new, essabre-90xx-rpi has now „teamed-up“ with Allo.com,

where u can buy such nice things like the „Allo Katana DAC“, LINK

or some „Vana-Player“ for example; LINK

or the phenomenal „Kali-Reclocker“ (64€ (incl.shipping)); LINK

and also some accessoires like this 5V power supply (3A) 13€ (inkl.shipping)..; LINK

will try to make some „deal“ with them that u as a essabre-90xx-rpi member or visitor get some kind of „voucher“-code or discount or similar..
greets for now 😉

Singxer SU-1 Driver update V4.45 (06.Juli 2018) V7.24 / I2S-HDMI-pinout / Matrix X-Sabre Pro 9038Pro

so, 😉
came by chance about this new „Singxer“ USB-Class-driver V4.45..we were at V4.36 and its directly from the same „shenzhenaudio“-folder/website->https://download.shenzhenaudio.com/Singxer/SU-1_driver_7.24_update/,
where we got our lovely „Singxer_USBAudio_v4.36.0_2017-11-14_DSD512.rar“ from; i will test it here; but my ES9038Q2M is now connected to the Pi; will see..(post the driver-pack at the forum too->Link)
The Singxer SU-1 is equipped with one ES9038Q2M + a XMOS XU-208->https://www.amazon.com/Singxer-digital-interface-XU208-DSD256/dp/B01N1OQY1A, https://kitsunehifi.com/product/singxersu1black/

by that i saw some I2S-HDMI-port pinout on the „Matrix X-Sabre Pro ES9038PRO 32Bit/768kHz DSD1024 Audio DAC„->https://www.shenzhenaudio.com/matrix-x-sabre-pro-es9038pro-32bit-768khz-dsd1024-audio-dac.html;
it says:“DSD1024 PCM768
As a new generation of Matrix flagship DAC, X-SABRE Pro not only supports 32Bit/768kHz PCM audio stream playback, but also supports DSD64, DSD128, DSD256, DSD512, and even supports DSD1024 with the sample rate of 45.158MHz via IS input port.“


(thats all „old“ stuff; but just to remember)

greets for now.. 😉

New Picoreplayer is out->V4.0.0 beta 5 + Moode 4.2 install instructions („moslog“)

hi there, 😉
a new picoreplayer is out->V4.0.0 beta 5->https://www.picoreplayer.org

its almost the same; like in this phenomenal 😉 , earlier post-> http://essabre-90xx-rpi.sfb2.com/2018/04/new-picoreplayer-is-out-v3-5-24-march-2018/

this time they have a rpi-kernel bump to Kernel 4.14.56, the DSD(Dop-)-„native patches“ are included, selectable..

tried to use the new „Allo Katana“-overlay here too on an ES9038Q2M->no success/didnt work/squeezelite refuses to start..

use now again (as described in the mentioned, earlier post) the „i-sabre-9023„-overlay, checked „384k“ and „bclk_ratio_int_div“ option, under „Card Control“..

got 32/384 without any problems, same with DSD-„material“->up to 32/352..(see also earlier post)..

but still a little bit „metallic“-sound; as described and still don´t know why..

Volumio“ for example has for my ears (IMO) a far far better sound/tune..


a few days ago, i tried to install Moode 4.2 on a fresh raspian-stretch-lite..i knew there were such commands like „mosbrief,moslog and moslast“ for monitoring the installation progress; but i didn´t know how to use it correctly..

started the installation anyway, but as you see absolutely nothing !! u don´t know if it hangs/or is finished or something and so i had an incomplete installation after all..

so today i had the time to re-test it; in short: place a „ssh“-file in the root of the card (after imaging the raspbian stretch-lite on it); u can now ssh on it..make the commands for the mosbuilding (absolutely fabulous !! article about it in english here->Link and in german here->Link (fabulous !!)

after rebooting the first time (u first have to make a „hard-reset“, means unplug and re-plug the power (else it didnt work !!) u can now ssh on the pi again (while still working/compiling etc..) with now (and thats important too) ssh-login: pi and pass (thats new): moodeaudio

now u can type „moslog“ and can watch the installation progress, wonderfulst !! 😉

(by that i´ve „demolished“ my lovely raspberry zero w ;-( , wrong soldered and so on (but this „soldering“ was, as said, more difficult than on an arduino or esp32-board for example)..

i still want to buy a new ES9038Q2M Green V1.07 and finally some OPA627, but have a small „cash-flow“-problem, „distinguished said“ at present 😉

will post then maybe more again 😉

Volumio v2.444 out / „Allo Katana“-support -> works on „chinese“-ES9038Q2M too !! / massive.. ;-)

so, 😉
a new Volumio is out->V2.444 ; its here->https://volumio.org/get-started/..
changelog says: „..Pi kernel bump to 4.14.56, Allo Katana support etc.“..
tested it here rightaway with the ES9038Q2M (2*AD797)->“massive“ 😉

but back to the Katana-overlay: at first „hear-out“ i´ve got the feel its more „massive“, more „accentuated“ (especially with the 2*AD797)..
don´t know at present if its the Katana-option, or the optimized Volumio-„footprint/improvements“ (see changelog)..
unfortunately i´ve got only 192khz/24bit with „audio resampling on“ (set it up for 384khz but got only 192/24)->

by that, there´s also a new „Volumio ESS9028QM„-option; works too (with the „Blue“ ES9038Q2M) (but didnt test if it reaches 384khz)..
but anyway there´s absolutely an improvement „sound-wise“ again !! „sounds“ again more „right“; really heavy, absolutely to recommend !! (RPI 3B-ES9038Q2M-2*AD797)

by that i´ve experimented a little bit more with „node-red“ and now with „MQTT-broker,-subscribe+publish“ and so on; really freaky, u can seamlessly connect an android app (->picture) with a pi zero as mqtt-broker and then via bluetooth (or websockets) to an arduino or esp32s..as said absolutely „whacky“ 😉

(„IoT MQTT Panel“->google/android-playstore->

(this is as said, all for (in favor) of our lovely „DIY-DAC„-project , display and usability-wise)..
(will post maybe then more..)
but as said, really a sound improvement with the new Volumio (+“Katana“-option)..
greets for now 😉

1 5 6 7 8 9 19